PCS-HFRR 自动航煤润滑测试仪，PC串行连接电缆 ，型号：PCS-003014
实验室耗材供应商的产品信息
| 产品特性ABS | 是否进口否 |
| 产地英国 | 加工定制否 |
| 品牌PCS | 型号PCS-003014 |
| 类型HFRR |
PC串行连接电缆 ，型号：PCS-003014
零件代码：PCS-003014
备用串行（RS232）电缆，用于将PC连接到HFRR或ABS设备。
PC Serial Connecting Cable
Part code: PCS-003014
A replacement serial (RS232) cable to connect a PC to either the HFRR or ABS equipment.
ABS自动航煤润滑测试仪
主要产品特点
· D5001 ASTM规范中包含PCS自动化BOCLE系统（ABS）
· 简单易用的界面-微处理器控制所有仪器功能
· 标准ASTM D5001测试程序已预先加载到ABS微处理器控制器中-操作员安装清洁后的样品，添加燃油样品并按下“开始测试”按钮
· 自动控制测试顺序–操作员不会在测试结果中引起变化
· 用于潮湿和干燥空气的自动流量控制器–无需操作员输入即可控制调节后的空气的湿度和流速
· 可选的基于PC的数据记录软件–允许将测试数据记录为***记录（适用于D5001和D6078）
· 可互换的湿度和温度探头–无需重新校准湿度和温度测量–只需将组合的相对湿度和温度探头更换为预先校准的单元
· PCS制造ABS测试环–测试环和样品的单一供应商可带来更高的质量控制
描述
ABS是一个微处理器控制的汽缸球磨损测试系统，可快速，可重复地评估喷气燃料的性能，完全符合ASTM D5001测试方法“通过汽球测量航空涡轮燃料的润滑性”。缸内润滑评估器”。
ABS包括一个紧凑的台式安装单元。需要的外部服务是符合ASTM D5001规范的压缩空气和100-230V主电源。经过约1,000次测试后，内部去离子水储罐需要重新加水。可以使用空气净化器/干燥器，对常规实验室或车间空气进行清洁和除湿，以满足ASTM标准（碳氢化合物<0.1 ppm）的要求。
ABS自动航煤润滑测试仪所需配件清单 英文版
部件名称 部件号 描述
ABS/ABSSL Metallurgical Microscope PCS-002752 The microscope is a standard metallurgical microscope
ABS Weight (500g) PCS-002734 A replacement stainless steel 500g weight.
ABS Test Ring Clamp Washer PCS-002736 A replacement stainless steel test ring clamp washer.
ABS Set of 10 Stainless Steel Spacers PCS-002751 A replacement set of 10 stainless steel spacers. The spacers ensure that each test is performed on a fresh, unused part of the test ring.
ABS Fuel Bath PCS-002738 A replacement, highly polished, stainless steel fuel bath.
ABS Ring PCS-002758 ABS test rings are manufactured to ASTM D5001 and supplied in packs of ten. Each ring can be used for ten tests.
ABS Test Ring Adapter PCS-002749 A replacement stainless steel test ring adapter.
ABS Balls PCS-002757 The balls are supplied in packs of 100, and are made from AISI 52100 stainless steel standard material.
ABS Fuel Bath Cover PCS-002737 A replacement fuel bath cover. Fixed air pipe fittings and tube-work are included.
ABS Main Temperature Probe PCS-002732 A replacement main temperature probe. This is an RTD type temperature probe (PT100) which can easily be damaged if accidentally dropped or bent.
ABSSL Ball Holder Assembly PCS-004413 ABSSL Ball Holder Screw (right) and ABS standard screw (Left).
ABS Specimens PCS-002757 (Balls) / PCS-002758 (Rings) One ball is used per test, while ten tests can be run using one test ring.
ABS Reference Fluid PCS-002728 / PCS-002729 Reference fluid A and B available in 1 litre bottles as specified in ASTM D5001.
ABS Test Ring Retaining Screw PCS-002735 A stainless steel replacement test ring retaining screw.
ABS Ball holder assembly PCS-002748 Includes collar, washer and screw.
ABS Arm Lift Motor O-Ring PCS-002772 A replacement rubber o-ring for the ABS or ABSSL arm lift motor.
ABS Humidity Verification Kit PCS-002908 The humidity verification kit is used to check whether the humidity probe is measuring the correct relative humidity.
ABS Microscope Graticule PCS-002859 This microscope graticule is used to calibrate the wear scar camera used on either the HFRR or ABS microscopes.
ABS Torque Driver and Adapter PCS-002750 A replacement pre-set torque driver and adapter.
PC Serial Connecting Cable PCS-003014 A replacement serial (RS232) cable to connect a PC to either the HFRR or ABS equipment.
Wear Scar Camera PCS-002967 The wear scar camera is an accessory for the HFRR & ABS which allows the user to capture calibrated images of a wear scar and measure the width within the instrument software.
Humidity and Temperature Probe PCS-002868 This is a replacement humidity and temperature measurement probe for the HFRR & ABS instruments.
Microscope Lamp PCS-002923 This replacement lamp can be used for the HFRR or ABS microscope.
Microscope Lamp Holder Assembly PCS-002874 A replacement lamp holder assembly for either the HFRR or ABS Meiji microscopes.
Microscope Eyepiece and Housing Eyepiece for microscope to view wear scar.It is used with both the ABS and HFRR.
