ABS Arm Lift Motor O-Ring

PCS-ABSSL-自动柴油摩擦测试仪-ABS升降马达O型圈-型号：PCS-002772

实验室耗材供应商的产品信息

ABS升降马达O型圈

零件代码：PCS-002772

ABS或ABSSL升降马达的备用橡胶O形圈。

在一段时间内，O形圈可能会由于普遍使用或液体溢出损坏橡胶而变得磨损/变脆。

O型圈需要频繁更换。

ABS Arm Lift Motor O-Ring

Part code: PCS-002772

A replacement rubber o-ring for the ABS or ABSSL arm lift motor.

Over a period of time the o-ring may become worn/brittle due to general use or fluid spillage damaging the rubber.

This item is simple to replace.

ABSSL自动柴油摩擦测试仪

主要产品特点

· 微处理器控制所有仪器功能

· 简单的用户界面。可以通过下载新固件来升级仪器功能

· 标准的ASTM D6078测试序列（过程A和B）都已预加载到微处理器控制器中

· 自动控制整个测试程序

· 操作员不会在测试结果中引起差异

· 自动流量控制器，用于潮湿和干燥的空气

· 无需操作员输入即可设置空调空气的湿度和流速

· 可选的基于PC的控制和数据记录软件

· 允许将其他测试程序下载到仪器中，并将测试参数记录为***记录

· 湿度和温度测量无需重新校准–只需将组合的相对湿度和温度探头更换为预校准单元即可

· 测试环和测试设备的单一供应来源

描述

PCS Instruments的ABSSL系统（自动BOCLE系统磨损量）是用于对柴油（中间馏分）燃料进行润滑性测试的全自动实验室仪器。它完全符合ASTM D-6078“通过划痕负荷式汽缸润滑性评估器（SLBOCLE）评估柴油燃料润滑性的标准测试方法”的要求。

可以修改标准PCS ABS测试设备，以允许执行SL-BOCLE测试。另外，ABSSL测试设备也可以作为新设备提供。

与标准BOCLE测试一样，该仪器采用了满溢的气缸对气缸接触几何形状。由于开始出现擦伤的特征是两个接触体之间的摩擦力突然升高，因此称重传感器被合并到称重臂组件中。这能够测量转盘和固定球之间的切向摩擦力。

ABSSL自动柴油摩擦测试仪所需配件清单 英文版

部件名称                部件号       部件描述

ABS Test Ring Clamp Washer   PCS-002736  A replacement stainless steel test ring clamp washer.

ABS Set of 10 Stainless Steel Spacers  PCS-002751  A replacement set of 10 stainless steel spacers. The spacers ensure that each test is performed on a fresh, unused part of the test ring.

ABS Fuel Bath      PCS-002738  A replacement, highly polished, stainless steel fuel bath.

ABS Test Ring Adapter    PCS-002749  A replacement stainless steel test ring adapter.

ABS Balls       PCS-002757  The balls are supplied in packs of 100, and are made from AISI 52100 stainless steel standard material.

ABS Fuel Bath Cover     PCS-002737  A replacement fuel bath cover. Fixed air pipe fittings and tube-work are included.

ABS Main Temperature Probe   PCS-002732  A replacement main temperature probe. This is an RTD type temperature probe (PT100) which can easily be damaged if accidentally dropped or bent.

ABS/ABSSL Metallurgical Microscope  PCS-002752  Metallurgical Microscope

ABSSL Ball Holder Assembly   PCS-004413 ABSSL Ball Holder Screw (right) and ABS standard screw (Left).

ABSSL Reference Fluid    PCS-002730 PCS-002731  Reference Fluid A and B supplied in 1.8 litre cans as specified ASTM D6078.

ABSSL Specimens   PCS-002757 (Balls) / PCS-002755 (Rings)  One ball is used per test, while ten tests can be run using one test ring.

ABSSL Weight Set     PCS-002753   Weights required for performing ASTM D6078.

ABS Test Ring Retaining Screw   PCS-002735  A stainless steel replacement test ring retaining screw.

ABS Arm Lift Motor O-Ring   PCS-002772  A replacement rubber o-ring for the ABS or ABSSL arm lift motor.

ABS Torque Driver and Adapter   PCS-002750  A replacement pre-set torque driver and adapter.

Microscope Eyepiece and Housing       Eyepiece for microscope to view wear scar.It is used with both the ABS and HFRR.